How to Put Lights on A Dirt Bike Without A Battery?

If you have a dirt bike and want to install a headlight on it but are unfamiliar with how to do so, then read this post because I will explain how to wire lights on a dirt bike that does not have a battery.

In a few USA states, riding a dirt bike on the street is legal if the rider complies with all of the local laws and norms.

It comes with all of the essential accessories, such as turn signals and headlights, among other things. The installation of a headlight is required to make a dirt bike street legal.

Many items are needed to make a dirt bike street-legal. Here’s how to make a dirt bike street legal.

Necessity of Dirt Bike Headlight:

You are not permitted to ride your dirt bike without a light once the sun has set and it becomes sufficiently dark outside.

You have to be able to see everything clearly in order to ride on the road, regardless of whether it is off-road or on-road, and you can’t do that if you don’t have the right kind of light.

It is impossible to ride a dirt bike without a light after dusk begins to fall in the evening.

Having the right lighting is essential for riding on the road, whether it be on or off-road. You must be able to see everything clearly.

You might not be familiar with the dirt bike you own because you’re a newbie. But I’m confident that being locked up does not make you happy.

Because a dirt bike doesn’t have any of these things, you can’t use the battery system or any other way to charge the lights. In this case, a magnet will make a current that will flow into the light and turn it on.

I’ll walk you through the whole process using the best tools and clear, simple language. If you know how to use dirt bike lights, you may have everything but can’t mount them.

Voilà. To attach the lights properly, you need an instructive guide. This article will help you buy something if you haven’t yet.

You may be surprised, but you don’t need to be an electrician to perform this. After you’ve read these directions, you can use the tools to easily finish all the steps.

Method of Putting Headlight on A Dirt Bike Without A Battery?

If you don’t want to get stuck, bring all the necessary tools. How do you mount lights to transport work items? Mount your dirt bike on the ramp. Turn off your dirt bike’s engine.

To prevent any bad situations or conditions, you should properly align the bike’s lights. The bike should be properly secured, though, so that it doesn’t move even a centimeter no matter how it is set up or where it is.

If there is even the slightest movement while using lights and riding in the dark, it could result in serious damage. When you are safe, you can always enjoy your bike trip.

Any location should have safety as its top priority.

One of the most important things is to attach the lights correctly and to fix them firmly. We require a few tools, which we will detail below, to accomplish this.

If you don’t know who performed the very first double backflip, you could be interested in this by reading the article we already wrote on that backflip.

Tools Required to Mount Your Lights

Insulated Plastic Covered Wire

A power source must be connected to a light on the dirt bike for mounting. The placement of the power source may not be the same as the light’s mounting on the bike.

So a wire connection is required. When wiring the power supply, you must utilize an insulated plastic layered wire.

Make sure to buy wire in a variety of colors, including red, yellow, blue, and black. If you use colored wire, it can be easier to tell which end is positive and which is negative.

A Pair of Pliers

When using a cable or wire, we must cut off the insulation in order to connect it to poles. Any wire that needs to be insulated can be a copper wire or any other wire that is covered in plastic.

To connect a wire to another wire or a gadget, regular people use their teeth to scrape off the plastic coating at the wire’s end.

However, since your teeth were not designed for this, I would advise against using them.

You can finish removing the plastic covering by using a pair of pliers.

Bolts

You are going to need some fitment tools in order to mount lights on the bike, and then you are going to have to fasten it to the bike. Bolts are typically used for any task that requires tightening.

When you are attaching lights to the bike, it is necessary to choose a method that is both secure and stable; in order to achieve this, you will need nuts and bolts.

Even a rather modest bolt can be utilized for quite forceful tightening if the right combination of materials is used.

Double Handler Switch

You are not allowed to leave our lights on continually; you are responsible for turning them off as well. In order to do this operation, you are going to require a handlebar switch.

It is referred to as a double handlebar switch because it allows for the addition of an additional light should it be required.

It is possible to switch from one light to another light depending on the requirements of the situation.

The fact that this handlebar switch makes it possible for you to install an additional light is by far the most significant benefit it offers.

The fact that it may be attached to the handle on any side of the bar according to your preference is what gives the handlebar its name.

And as a consequence of this, you have two switches, and the switch configuration that you have is known as a double handlebar switch.

The switch is placed where the rider can easily reach it, so he can turn the light on or off whenever he wants.

Rectifier

Alternating current, which is sometimes referred to as AC, is generated by the magneto, which serves as the primary source of power for the bicycle.

In order to use this, you will need to convert 12-volt alternating electricity into direct current of the same voltage.

The rectifier is an electronic device that transforms alternating current into direct current. It does this by inverting the phase of the alternating current.

After it is changed into direct current, it is easy to use to turn on the dirt bike light.

Driller

It’s possible that even if you have all of the necessary equipment and tools for mounting your lights on the front space of your bike, you won’t be able to do so since there won’t be enough room for your lights to fit properly.

The driller is an instrument that will unquestionably be of use to you in this matter.

You are free to drill wherever to create a hole that is proportional to the size of your bolts and nuts, after which you can set your lights and use the bolts to make the structure more stable.

You need to make sure that you get bolts and hole diameters of the appropriate size.

Spanner

It’s possible that you’ve heard of a spanner. It doesn’t matter what kind of work you do, this is a highly useful tool. In order to install the light, you will first need to remove the gas seat and cylinder from their mountings.

After removing the gas cylinder from its mounting, you will be able to complete the electrical wiring that connects the light to the power supply.

A spanner will be required for both unmounting the lights prior to opening the housing and opening the housing in order to tighten the nuts and bolts.

Bullet Connectors

You can also refer to bullet connectors as banana plugs. These plugs and connectors provide for reliable and speedy electrical connections.

Bullet connections consist of a male component shaped like a bullet and a female component shaped like a socket.

The primary application for these is in automotive wiring, namely to create connections that do not require much effort to put together yet are nonetheless secure.

LED Lights

The installation of a light on your dirt bike is the primary focus of this tutorial. Therefore, having LED light of a high quality is the most significant factor in achieving the desired level of light intensity, and that factor is what this procedure is founded on.

You are only going to be using the tools in this area for the one specific purpose of installing lights on the dirt bike.

To get the best performance out of your light, you must first install it in the manner that we have specified above, and then you must place it at the appropriate height.

How To Put Lights on A Dirt bike Without Battery?

FAQ – Frequently Asked Question

Can you add lights to a dirt bike?

Since most dirt bikes lack a headlight, this is not surprising. Your bike needs lights if you want to ride it on the street. You can, in fact, install lights to a dirt bike.

Can you start a dirt bike without a battery?

A battery is required to start a car, yet the majority of dirt bikes operate without them.

Battery power is required for dirt bikes with electric components including self-starters, headlights, brake lights, and electronic fuel injectors.

Which is better kick start or electric start?

Kick starts are more dependable than electric starts in terms of reliability. Kickstart dirt bike is lighter because it doesn’t require a battery to ride on tracks.

Due to its low weight, a light-weight dirt bike became fast and is now more comfortable to ride.

Can you kick start a bike with a dead battery?

In addition to kickstarting, pop starting, bump starting, and push starting are other tried-and-true techniques for starting an engine when the battery is dead and the electric start is not functioning.

What is the life of bike battery?

There is not confirmed but almost it has a life of between 1-10 years that depends on many things.

Is Kick Start necessary?

Bikes now come with new technologies, but there are still numerous instances where the kickstart is a lifesaver when the battery can’t start the bike.

Can a bike run without battery?

Yes, a lot of dirt bikes can function without a battery. An engine-connected alternator or magneto that supplies power to the light, horn, spark plug, and ignition coil.

Conclusion

If you’ve read from the beginning, you know how to fix dirt bike LED lights. Now you’re safe from nighttime accidents.

This technique doesn’t require an electrical engineer, and you can perform it yourself using this article.

Now that you’ve solved it, it won’t bother you anymore. I hope this article has answered your questions regarding installing a light on your bike without a battery.

Now I’ve simplified this method. Visit if you like it. Happy biking!